Water Suspend Alarm System Digital Flow Meter
The cut-off alarm is composed of water, oil, air flow detectors and sound and light alarms, which can sound the horn to alarm when the liquid or gas in the pipeline is cut off. Used for circulating cooling water cut-off protection, high-speed running machinery cooling water cut-off alarm, evaporative cold water cut-off alarm, water tower cooling water shortage detection, chiller cooling water cut-off alarm, water flow monitoring alarm in water pipes, lubricating oil cut-off monitoring, in When the pipeline is cut off, an alarm signal will be sent out in time to prevent the machine from idling and causing unnecessary property losses. The installation of the cut-out alarm is very simple. According to the different power supply selected, directly connect the flow detector, the sound and light alarm, and the power supply in series to work. The main component of the cut-off alarm is the flow detection device. Different types of cut-off detectors can be selected according to the different conditions of the user, such as sea water or other corrosive liquids. The tetrafluoroalloy anti-corrosion flow detection device should be selected, and it will also appear at the same time. High pressure resistance, high temperature resistance, explosion-proof and other different situations. The application of cut-off alarm is very wide, mainly used in the cut-off alarm of large equipment, such as water pipe cut-off alarm, tap water cut-off alarm, cooling water cut-off alarm, cooling tower water cut-off alarm, laser machine, refrigerator, screw refrigeration compressor , And various equipment with uninterrupted circulation of cooling water or lubricating oil. This is a very important protection device. If it is not installed or the quality of the installed product is too poor, it will cause no alarm when the alarm occurs, hundreds of thousands or Millions of equipment are severely worn or damaged.
断水报警器
断流报警器通过水、油、空气的流动检测器和声光警报器构成，可在探测管道的液体或者气体断流时鸣笛报警。用于循环冷却水断流保护、高速运行机械冷却水断流报警、蒸发冷断水报警、水塔冷却水缺水检测、冷冻机冷却水断水报警、水管中水流的监控报警、润滑油断流监测，在管道断流时，及时发出报警信号，防止机器空转，造成不必要的财产损失。
断流报警器的安装非常简单，根据所选择电源不同，直接把流量检测器、声光警报器、电源串联起来，即可工作。 断流报警器的主要部件是流量检测装置，根据用户的不同情况而选择不同类型的断流检测器，比如海水或者其他腐蚀性液体，要选用四氟合金防腐蚀流量检测装置，同时还会出现耐高压、耐高温、防爆等不同的情况。 断流报警器的应用非常广泛，主要是应用于大型设备的断流报警，如水管断流报警、自来水断流报警、冷却断水报警、冷却塔断水报警，激光机、制冷机、螺杆制冷压缩机，以及各种有不间断循环冷却水或者润滑油的设备，这是一个非常重要的保护装置，如果不安装或者安装的产品质量太差，就会造成该报警的时候没有报警，几十万或者几百万的设备被严重磨损或者损坏。
